Nerdy Drunk

Drunk on technology

User Tools

Site Tools


brocade:vdx-vcsfabric

Brocade VDX VCS Fabric

General

  • vcsid must match on all switches
  • rbridge-id must be unique on all switches
  • firmware version should match
  • virtual-fabric must match on all switches
  • isl must be enabled on ports linking switches
  • Layer 2 is configured across the entire fabric
  • Layer 3 is unique to each route bridge (switch)

Replace failed switch in existing fabric

On Replacement Switch

  • # show vcs ← Obtain replacement switch WWN
  • # firmware download interactive ← FTP information, IP, folder, user, pass
  • # license add licstr “xxx” ← Works best if you copy and paste the entire line

On Existing Fabric

  • show version
  • show vcs
  • vcs replace rbridge-id 1 ← replacement switch WWN

Physically replace switch power on replacement switch

On Replacement Switch

  • # vcs rbridge-id 1 vcsid 1 logical-chassis enable
  • # conf t
  • (config) # vcs virtual-fabric enable
  • (config) # exit
  • # show vcs
  • # show fabric isl
  • # show fabric islports
brocade/vdx-vcsfabric.txt · Last modified: 2022/07/21 10:41 by 127.0.0.1